			INSTALLING MAGICFILTER
			----------------------


* Run "configure.sh".  If you want to put the files in any other directory
  tree than /usr/local (i.e. /usr/local/bin, /usr/local/man) then call
  it with the option --prefix=<directory-prefix>, for example:

	./configure.sh --prefix=/usr

  Configure.sh works something like Autoconf's configure scripts, and
  has the following options:

    --src=DIR		where the source lives (.)
    --prefix=DIR	where to install the final product (/usr/local)
    --execdir=DIR	where to put executables (prefix/bin)
    --mandir=DIR	where to put manpages (prefix/man)
    --confdir=DIR	where to put configuration information (/etc)

	If magicfilter uses a private magic file, it will be placed
	here, and if you hand-make your own magic.m4 file, magicfilter
	will look for it here as well.

    --filterdir=DIR	where to put printer filters ($prefix/sbin/printers)
    --path=PATH		look for conversion programs in PATH
					(/sbin:/usr/sbin:/bin:/usr/bin:\
					 /usr/local/bin:/usr/X11R6/bin)

	If configure can't find a conversion program, it will build
	magicfilter without support for that particular conversion.
	The default path is set up to (hopefully) get all the normal
	places for filters, but if you're on a bizarre system like
	Solaris, you may need to customise it to include /opt/LLOCL/bin
	and so on.

    --use-local-magic	install a private magic file

	Normally, magicfilter will attempt to use /etc/magic (or
	whereever the magic for file(1) lives), but if that magic
	file does not appear to be modern enough (experimentally
	determined by seeing if it recognises a H-P pjl file),
	configure.sh will configure magicfilter to use a local
	magic file.

    --with-papersize=size 

	Magicfilter writes US Letter size pages by default, but
	you can set the default to something else with this
	option.

    --traditional

	The normal magicfilter printer definition files are m4
	scripts that are merged with a standard ruleset.  If is is
	not how you want magicfilter to work, --traditional builds
	printer definition files that are already processed and
	installs a version of magicfilter that understands this
	format.   This is here for people who prefer to hack their
	printer definitions;  if you don't, installing the normal
	magicfilter makes all of your printers consistant.

* Run "make".

* Run "make install".

-----------------------------------------------------------------------------

The following instructions apply only to systems using the BSD
printing system.  Linux and BSD-derived OSes all use the BSD printing
system, some System V-based systems such as IRIX do as an option
whereas others, such as Solaris, do not.

If in doubt, check for the existence of the file /etc/printcap.

NOTE: The traditional BSD print daemon does *not* support filters for
remote printers, hence the instructions below apply only to systems
which have the printers physically attached.  A version of lpd which
does not have this problem is available as a part of the LPRng package
from ftp://dickory.sdsu.edu/pub/LPRng/.  To use filters with remote
printers for LPRng, specify the "bqfilter" flag in /etc/printcap, for
example:

  # Remote HP LaserJet 4 (possibly connected via built-in Ethernet)
  remoteprinter:\
	:lp=:rm=printserver:rp=remoteprinter:\
	:sd=/var/spool/lpd/remoteprinter:\
	:bqfilter:mx#0:\
	if=/usr/sbin/printers/ljet4:

-----------------------------------------------------------------------------

* Edit your /etc/printcap file to contain a call to the appropriate
  printer filter in the "if" entry of each local printer.  This will
  typically look something like this:

  pencil|lp|PostScript|ljet4|HP LaserJet 4:\
	:lp=/dev/lp1:sd=/var/spool/lpd/pencil:sh:mx#0:\
	:if=/usr/sbin/printers/ljet4:

  crayon|dj550c|color|HP DeskJet 550C:\
	:lp=/dev/lp2:sd=/var/spool/lpd/crayon:sh:mx#0:\
	:if=/usr/sbin/printers/dj550c:

  Note the alias "lp" for the default (text) printer, and "PostScript"
  for the preferred PostScript printer.

  IMPORTANT: If you're on a really old version of UNIX which doesn't
  support the so-called "#!-hack" for selecting an interpreter for
  your filters, this form of installation does not work.  Instead, you
  need to make your /etc/printcap file look something like this:

  pencil|lp|PostScript|ljet4|HP LaserJet 4:\
	:lp=/dev/lp1:sd=/var/spool/lpd/pencil:sh:mx#0:\
	:if=/usr/local/bin/magicfilter:\
	:af=/usr/sbin/printers/ljet4:

  To test if your OS supports the #!-hack, type at the command line:

	/usr/local/bin/XXXX < /dev/null

  ... where XXXX-filter is any installed magic filter.  If you get an
  error message, your OS does *not* support the #!-hack.

  Linux, all BSD-derived OSes and System V R3 and later all support
  the #!-hack.

* Kill and restart lpd.  Your printer filter should now be working.
