/* * hosts.c Copyright (C) 1992 Drew Eckhardt * Copyright (C) 1993, 1994, 1995 Eric Youngdale * * mid to lowlevel SCSI driver interface * Initial versions: Drew Eckhardt * Subsequent revisions: Eric Youngdale * * */ /* * This file contains the medium level SCSI * host interface initialization, as well as the scsi_hosts array of SCSI * hosts currently present in the system. */ #include #include "../block/blk.h" #include #include #include #include "scsi.h" #ifndef NULL #define NULL 0L #endif #define HOSTS_C #include "hosts.h" #ifdef CONFIG_SCSI_AHA152X #include "aha152x.h" #endif #ifdef CONFIG_SCSI_AHA1542 #include "aha1542.h" #endif #ifdef CONFIG_SCSI_AHA1740 #include "aha1740.h" #endif #ifdef CONFIG_SCSI_AHA274X #include "aha274x.h" #endif #ifdef CONFIG_SCSI_BUSLOGIC #include "BusLogic.h" #endif #ifdef CONFIG_SCSI_EATA_DMA #include "eata_dma.h" #endif #ifdef CONFIG_SCSI_U14_34F #include "u14-34f.h" #endif #ifdef CONFIG_SCSI_FUTURE_DOMAIN #include "fdomain.h" #endif #ifdef CONFIG_SCSI_GENERIC_NCR5380 #include "g_NCR5380.h" #endif #ifdef CONFIG_SCSI_IN2000 #include "in2000.h" #endif #ifdef CONFIG_SCSI_PAS16 #include "pas16.h" #endif #ifdef CONFIG_SCSI_QLOGIC #include "qlogic.h" #endif #ifdef CONFIG_SCSI_SEAGATE #include "seagate.h" #endif #ifdef CONFIG_SCSI_T128 #include "t128.h" #endif #ifdef CONFIG_SCSI_NCR53C7xx #include "53c7,8xx.h" #endif #ifdef CONFIG_SCSI_ULTRASTOR #include "ultrastor.h" #endif #ifdef CONFIG_SCSI_7000FASST #include "wd7000.h" #endif #ifdef CONFIG_SCSI_EATA #include "eata.h" #endif #ifdef CONFIG_SCSI_DEBUG #include "scsi_debug.h" #endif /* static const char RCSid[] = "$Header: /usr/src/linux/kernel/blk_drv/scsi/RCS/hosts.c,v 1.3 1993/09/24 12:21:00 drew Exp drew $"; */ /* * The scsi host entries should be in the order you wish the * cards to be detected. A driver may appear more than once IFF * it can deal with being detected (and therefore initialized) * with more than one simultaneous host number, can handle being * reentrant, etc. * * They may appear in any order, as each SCSI host is told which host number it is * during detection. */ /* This is a placeholder for controllers that are not configured into the system - we do this to ensure that the controller numbering is always consistent, no matter how the kernel is configured. */ #define NO_CONTROLLER {NULL, NULL, NULL, NULL, NULL, NULL, NULL, \ NULL, NULL, 0, 0, 0, 0, 0, 0} /* * When figure is run, we don't want to link to any object code. Since * the macro for each host will contain function pointers, we cannot * use it and instead must use a "blank" that does no such * idiocy. */ Scsi_Host_Template * scsi_hosts = NULL; static Scsi_Host_Template builtin_scsi_hosts[] = { /* BusLogic must come before aha1542.c */ #ifdef CONFIG_SCSI_BUSLOGIC BUSLOGIC, #endif #ifdef CONFIG_SCSI_U14_34F ULTRASTOR_14_34F, #endif #ifdef CONFIG_SCSI_ULTRASTOR ULTRASTOR_14F, #endif #ifdef CONFIG_SCSI_AHA152X AHA152X, #endif #ifdef CONFIG_SCSI_AHA1542 AHA1542, #endif #ifdef CONFIG_SCSI_AHA1740 AHA1740, #endif #ifdef CONFIG_SCSI_AHA274X AHA274X, #endif #ifdef CONFIG_SCSI_FUTURE_DOMAIN FDOMAIN_16X0, #endif #ifdef CONFIG_SCSI_IN2000 IN2000, #endif #ifdef CONFIG_SCSI_GENERIC_NCR5380 GENERIC_NCR5380, #endif #ifdef CONFIG_SCSI_QLOGIC QLOGIC, #endif #ifdef CONFIG_SCSI_PAS16 MV_PAS16, #endif #ifdef CONFIG_SCSI_SEAGATE SEAGATE_ST0X, #endif #ifdef CONFIG_SCSI_T128 TRANTOR_T128, #endif #ifdef CONFIG_SCSI_NCR53C7xx NCR53c7xx, #endif #ifdef CONFIG_SCSI_EATA_DMA EATA_DMA, #endif #ifdef CONFIG_SCSI_7000FASST WD7000, #endif #ifdef CONFIG_SCSI_EATA EATA, #endif #ifdef CONFIG_SCSI_DEBUG SCSI_DEBUG, #endif }; #define MAX_SCSI_HOSTS (sizeof(builtin_scsi_hosts) / sizeof(Scsi_Host_Template)) /* * Our semaphores and timeout counters, where size depends on MAX_SCSI_HOSTS here. */ struct Scsi_Host * scsi_hostlist = NULL; struct Scsi_Device_Template * scsi_devicelist; int max_scsi_hosts = 0; int next_scsi_host = 0; void scsi_unregister(struct Scsi_Host * sh){ struct Scsi_Host * shpnt; if(scsi_hostlist == sh) scsi_hostlist = sh->next; else { shpnt = scsi_hostlist; while(shpnt->next != sh) shpnt = shpnt->next; shpnt->next = shpnt->next->next; }; /* If we are removing the last host registered, it is safe to reuse its host number (this avoids "holes" at boot time) (DB) */ if (max_scsi_hosts == next_scsi_host && !scsi_loadable_module_flag) max_scsi_hosts--; next_scsi_host--; scsi_init_free((char *) sh, sizeof(struct Scsi_Host) + sh->extra_bytes); } /* We call this when we come across a new host adapter. We only do this once we are 100% sure that we want to use this host adapter - it is a pain to reverse this, so we try and avoid it */ struct Scsi_Host * scsi_register(Scsi_Host_Template * tpnt, int j){ struct Scsi_Host * retval, *shpnt; retval = (struct Scsi_Host *)scsi_init_malloc(sizeof(struct Scsi_Host) + j, (tpnt->unchecked_isa_dma && j ? GFP_DMA : 0) | GFP_ATOMIC); retval->host_busy = 0; retval->block = NULL; retval->wish_block = 0; if(j > 0xffff) panic("Too many extra bytes requested\n"); retval->extra_bytes = j; retval->loaded_as_module = scsi_loadable_module_flag; retval->host_no = max_scsi_hosts++; /* never reuse host_no (DB) */ next_scsi_host++; retval->host_queue = NULL; retval->host_wait = NULL; retval->last_reset = 0; retval->irq = 0; retval->dma_channel = 0xff; retval->io_port = 0; retval->forbidden_addr = 0; retval->forbidden_size = 0; retval->hostt = tpnt; retval->next = NULL; #ifdef DEBUG printk("Register %x %x: %d\n", (int)retval, (int)retval->hostt, j); #endif /* The next four are the default values which can be overridden if need be */ retval->this_id = tpnt->this_id; retval->can_queue = tpnt->can_queue; retval->sg_tablesize = tpnt->sg_tablesize; retval->cmd_per_lun = tpnt->cmd_per_lun; retval->unchecked_isa_dma = tpnt->unchecked_isa_dma; retval->select_queue_depths = NULL; if(!scsi_hostlist) scsi_hostlist = retval; else { shpnt = scsi_hostlist; while(shpnt->next) shpnt = shpnt->next; shpnt->next = retval; } return retval; } int scsi_register_device(struct Scsi_Device_Template * sdpnt) { if(sdpnt->next) panic("Device already registered"); sdpnt->next = scsi_devicelist; scsi_devicelist = sdpnt; return 0; } unsigned int scsi_init() { static int called = 0; int i, pcount; Scsi_Host_Template * tpnt; struct Scsi_Host * shpnt; const char * name; if(called) return 0; called = 1; for (tpnt = &builtin_scsi_hosts[0], i = 0; i < MAX_SCSI_HOSTS; ++i, tpnt++) { /* * Initialize our semaphores. -1 is interpreted to mean * "inactive" - where as 0 will indicate a time out condition. */ pcount = next_scsi_host; if ((tpnt->detect) && (tpnt->present = tpnt->detect(tpnt))) { /* The only time this should come up is when people use some kind of patched driver of some kind or another. */ if(pcount == next_scsi_host) { if(tpnt->present > 1) panic("Failure to register low-level scsi driver"); /* The low-level driver failed to register a driver. We can do this now. */ scsi_register(tpnt,0); }; tpnt->next = scsi_hosts; scsi_hosts = tpnt; } } for(shpnt=scsi_hostlist; shpnt; shpnt = shpnt->next) { if(shpnt->hostt->info) name = shpnt->hostt->info(shpnt); else name = shpnt->hostt->name; printk ("scsi%d : %s\n", /* And print a little message */ shpnt->host_no, name); } printk ("scsi : %d host%s.\n", next_scsi_host, (next_scsi_host == 1) ? "" : "s"); scsi_make_blocked_list(); /* Now attach the high level drivers */ #ifdef CONFIG_BLK_DEV_SD scsi_register_device(&sd_template); #endif #ifdef CONFIG_BLK_DEV_SR scsi_register_device(&sr_template); #endif #ifdef CONFIG_CHR_DEV_ST scsi_register_device(&st_template); #endif #ifdef CONFIG_CHR_DEV_SG scsi_register_device(&sg_template); #endif #if 0 max_scsi_hosts = next_scsi_host; #endif return 0; } void scsi_mem_init(unsigned long memory_end) { struct Scsi_Host *Host; long High8, Low24; for (Host = scsi_hostlist; Host != NULL; Host = Host->next) { if (Host->forbidden_addr > 0 && Host->forbidden_size > 0) { for (High8 = 1<<24; High8 < memory_end; High8 += 1<<24) { for (Low24 = Host->forbidden_addr; Low24 < Host->forbidden_addr + Host->forbidden_size; Low24 += PAGE_SIZE) { unsigned long ForbiddenAddress = High8 + Low24; if (ForbiddenAddress >= memory_end) goto next_host; mem_map[MAP_NR(ForbiddenAddress)] = MAP_PAGE_RESERVED; } } } next_host: continue; } } /* * Overrides for Emacs so that we follow Linus's tabbing style. * Emacs will notice this stuff at the end of the file and automatically * adjust the settings for this buffer only. This must remain at the end * of the file. * --------------------------------------------------------------------------- * Local variables: * c-indent-level: 8 * c-brace-imaginary-offset: 0 * c-brace-offset: -8 * c-argdecl-indent: 8 * c-label-offset: -8 * c-continued-statement-offset: 8 * c-continued-brace-offset: 0 * End: */