/* Copyright (C) 1993 Free Software Foundation This file is part of the GNU IO Library. This library is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU CC; see the file COPYING. If not, write to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. As a special exception, if you link this library with files compiled with a GNU compiler to produce an executable, this does not cause the resulting executable to be covered by the GNU General Public License. This exception does not however invalidate any other reasons why the executable file might be covered by the GNU General Public License. */ /* * Copyright (c) 1990 Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms are permitted * provided that the above copyright notice and this paragraph are * duplicated in all such forms and that any documentation, * advertising materials, and other materials related to such * distribution and use acknowledge that the software was developed * by the University of California, Berkeley. The name of the * University may not be used to endorse or promote products derived * from this software without specific prior written permission. * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)iovfprintf.c 1.1 (Berkeley) 02/11/01"; #endif /* LIBC_SCCS and not lint */ /* * Actual printf innards. * * This code is large and complicated... */ #include #include "libioP.h" #include #ifdef __STDC__ #include #else #include #endif /* * Define FLOATING_POINT to get floating point. */ #ifndef NO_FLOATING_POINT #define FLOATING_POINT #endif static int _IO_helper_overflow (_IO_FILE *, int); static int helper_vfprintf (_IO_FILE*, char const *, _IO_va_list); /* end of configuration stuff */ /* * Helper "class" for `fprintf to unbuffered': creates a * temporary buffer. */ struct helper_file { struct _IO_FILE_plus _f; _IO_FILE *_put_stream; }; static int _IO_helper_overflow (fp, c) _IO_FILE *fp; int c; { _IO_FILE *target = ((struct helper_file*)fp)->_put_stream; int used = fp->_IO_write_ptr - fp->_IO_write_base; if (used) { _IO_sputn(target, fp->_IO_write_base, used); fp->_IO_write_ptr -= used; } return _IO_putc (c, fp); } static struct _IO_jump_t _IO_helper_jumps = { _IO_helper_overflow, _IO_default_underflow, _IO_default_xsputn, _IO_default_xsgetn, _IO_default_read, _IO_default_write, _IO_default_doallocate, _IO_default_pbackfail, _IO_default_setbuf, _IO_default_sync, _IO_default_finish, _IO_default_close, _IO_default_stat, _IO_default_seek, _IO_default_seekoff, _IO_default_seekpos, _IO_default_uflow }; static int helper_vfprintf(fp, fmt0, ap) register _IO_FILE* fp; char const *fmt0; _IO_va_list ap; { char buf[_IO_BUFSIZ]; struct helper_file helper; register _IO_FILE *hp = (_IO_FILE*)&helper; int result, to_flush; /* initialize helper */ helper._put_stream = fp; hp->_IO_write_base = buf; hp->_IO_write_ptr = buf; hp->_IO_write_end = buf+_IO_BUFSIZ; hp->_IO_file_flags = _IO_MAGIC|_IO_NO_READS; hp->_jumps = &_IO_helper_jumps; /* Now print to helper instead. */ result = _IO_vfprintf(hp, fmt0, ap); /* Now flush anything from the helper to the fp. */ if ((to_flush = hp->_IO_write_ptr - hp->_IO_write_base) > 0) { if (_IO_sputn(fp, hp->_IO_write_base, to_flush) != to_flush) return EOF; } return result; } #ifdef FLOATING_POINT #include "floatio.h" #define BUF (MAXEXP+MAXFRACT+1) /* + decimal point */ #define DEFPREC 6 extern double modf __P((double, double*)); #else /* no FLOATING_POINT */ #define BUF 40 #endif /* FLOATING_POINT */ /* * Macros for converting digits to letters and vice versa */ #define to_digit(c) ((c) - '0') #define is_digit(c) ((unsigned)to_digit(c) <= 9) #define to_char(n) ((n) + '0') /* * Flags used during conversion. */ #define LONGINT 0x01 /* long integer */ #define LONGDBL 0x02 /* long double; unimplemented */ #define SHORTINT 0x04 /* short integer */ #define ALT 0x08 /* alternate form */ #define LADJUST 0x10 /* left adjustment */ #define ZEROPAD 0x20 /* zero (as opposed to blank) pad */ #define HEXPREFIX 0x40 /* add 0x or 0X prefix */ int _IO_vfprintf(fp, fmt0, ap) register _IO_FILE* fp; char const *fmt0; _IO_va_list ap; { register const char *fmt; /* format string */ register int ch; /* character from fmt */ register int n; /* handy integer (short term usage) */ register char *cp; /* handy char pointer (short term usage) */ const char *fmark; /* for remembering a place in fmt */ register int flags; /* flags as above */ int ret; /* return value accumulator */ int width; /* width from format (%8d), or 0 */ int prec; /* precision from format (%.3d), or -1 */ char sign; /* sign prefix (' ', '+', '-', or \0) */ #ifdef FLOATING_POINT #ifndef _IO_USE_DTOA int softsign; /* temporary negative sign for floats */ #endif long double _double; /* double precision arguments %[eEfgG] */ #ifndef _IO_USE_DTOA int fpprec; /* `extra' floating precision in [eEfgG] */ #endif #endif unsigned long _ulong; /* integer arguments %[diouxX] */ enum { OCT, DEC, HEX } base;/* base for [diouxX] conversion */ int dprec; /* a copy of prec if [diouxX], 0 otherwise */ int dpad; /* extra 0 padding needed for integers */ int fieldsz; /* field size expanded by sign, dpad etc */ /* The initialization of 'size' is to suppress a warning that 'size' might be used unitialized. It seems gcc can't quite grok this spaghetti code ... */ int size = 0; /* size of converted field or string */ char buf[BUF]; /* space for %c, %[diouxX], %[eEfgG] */ char ox[2]; /* space for 0x hex-prefix */ /* * BEWARE, these `goto error' on error, and PAD uses `n'. */ #define PRINT(ptr, len) \ do { if (_IO_sputn(fp,ptr, len) != len) goto error; } while (0) #define PAD_SP(howmany) if (_IO_padn(fp, ' ', howmany) < (howmany)) goto error; #define PAD_0(howmany) if (_IO_padn(fp, '0', howmany) < (howmany)) goto error; /* * To extend shorts properly, we need both signed and unsigned * argument extraction methods. */ #define SARG() \ (flags&LONGINT ? va_arg(ap, long) : \ flags&SHORTINT ? (long)(short)va_arg(ap, int) : \ (long)va_arg(ap, int)) #define UARG() \ (flags&LONGINT ? va_arg(ap, unsigned long) : \ flags&SHORTINT ? (unsigned long)(unsigned short)va_arg(ap, int) : \ (unsigned long)va_arg(ap, unsigned int)) /* optimise stderr (and other unbuffered Unix files) */ if (fp->_IO_file_flags & _IO_UNBUFFERED) return helper_vfprintf(fp, fmt0, ap); fmt = fmt0; ret = 0; /* * Scan the format for conversions (`%' character). */ for (;;) { for (fmark = fmt; (ch = *fmt) != '\0' && ch != '%'; fmt++) /* void */; if ((n = fmt - fmark) != 0) { PRINT(fmark, n); ret += n; } if (ch == '\0') goto done; fmt++; /* skip over '%' */ flags = 0; dprec = 0; #if defined(FLOATING_POINT) && !defined (_IO_USE_DTOA) fpprec = 0; #endif width = 0; prec = -1; sign = '\0'; rflag: ch = *fmt++; reswitch: switch (ch) { case ' ': /* * ``If the space and + flags both appear, the space * flag will be ignored.'' * -- ANSI X3J11 */ if (!sign) sign = ' '; goto rflag; case '#': flags |= ALT; goto rflag; case '*': /* * ``A negative field width argument is taken as a * - flag followed by a positive field width.'' * -- ANSI X3J11 * They don't exclude field widths read from args. */ if ((width = va_arg(ap, int)) >= 0) goto rflag; width = -width; /* FALLTHROUGH */ case '-': flags |= LADJUST; flags &= ~ZEROPAD; /* '-' disables '0' */ goto rflag; case '+': sign = '+'; goto rflag; case '.': if ((ch = *fmt++) == '*') { n = va_arg(ap, int); prec = n < 0 ? -1 : n; goto rflag; } n = 0; while (is_digit(ch)) { n = 10 * n + to_digit(ch); ch = *fmt++; } prec = n < 0 ? -1 : n; goto reswitch; case '0': /* * ``Note that 0 is taken as a flag, not as the * beginning of a field width.'' * -- ANSI X3J11 */ if (!(flags & LADJUST)) flags |= ZEROPAD; /* '-' disables '0' */ goto rflag; case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': n = 0; do { n = 10 * n + to_digit(ch); ch = *fmt++; } while (is_digit(ch)); width = n; goto reswitch; #ifdef FLOATING_POINT case 'L': flags |= LONGDBL; goto rflag; #endif case 'h': flags |= SHORTINT; goto rflag; case 'l': flags |= LONGINT; goto rflag; case 'c': *(cp = buf) = va_arg(ap, int); size = 1; sign = '\0'; break; case 'D': flags |= LONGINT; /*FALLTHROUGH*/ case 'd': case 'i': _ulong = SARG(); if ((long)_ulong < 0) { _ulong = -_ulong; sign = '-'; } base = DEC; goto number; #ifdef FLOATING_POINT case 'e': case 'E': case 'f': case 'F': case 'g': case 'G': if (flags & LONGDBL) _double = va_arg(ap, long double); else _double = (long double) (va_arg(ap, double)); #ifdef _IO_USE_DTOA { int fmt_flags = 0; int fill = ' '; if (flags & ALT) fmt_flags |= _IO_SHOWPOINT; if (flags & LADJUST) fmt_flags |= _IO_LEFT; else if (flags & ZEROPAD) fmt_flags |= _IO_INTERNAL, fill = '0'; if (flags & LONGDBL) fmt_flags |= _IO_LDOUBLE; n = _IO_outfloat(_double, fp, ch, width, prec < 0 ? DEFPREC : prec, fmt_flags, sign, fill); if (n < 0) goto error; ret += n; } /* CHECK ERROR! */ continue; #else /* * don't do unrealistic precision; just pad it with * zeroes later, so buffer size stays rational. */ if (prec > MAXFRACT) { if ((ch != 'g' && ch != 'G') || (flags&ALT)) fpprec = prec - MAXFRACT; prec = MAXFRACT; } else if (prec == -1) prec = DEFPREC; /* __cvt_double may have to round up before the "start" of its buffer, i.e. ``intf("%.2f", (double)9.999);''; if the first character is still NUL, it did. softsign avoids negative 0 if _double < 0 but no significant digits will be shown. */ cp = buf; *cp = '\0'; size = __cvt_double(_double, prec, flags, &softsign, ch, cp, buf + sizeof(buf)); if (softsign) sign = '-'; if (*cp == '\0') cp++; break; #endif #endif /* FLOATING_POINT */ case 'n': if (flags & LONGINT) *va_arg(ap, long *) = ret; else if (flags & SHORTINT) *va_arg(ap, short *) = ret; else *va_arg(ap, int *) = ret; continue; /* no output */ case 'O': flags |= LONGINT; /*FALLTHROUGH*/ case 'o': _ulong = UARG(); base = OCT; goto nosign; case 'p': /* * ``The argument shall be a pointer to void. The * value of the pointer is converted to a sequence * of printable characters, in an implementation- * defined manner.'' * -- ANSI X3J11 */ /* NOSTRICT */ _ulong = (unsigned long)va_arg(ap, void *); base = HEX; flags |= HEXPREFIX; ch = 'x'; goto nosign; case 's': if ((cp = va_arg(ap, char *)) == NULL) cp = "(null)"; if (prec >= 0) { /* * can't use strlen; can only look for the * NUL in the first `prec' characters, and * strlen() will go further. */ char *p = (char*)memchr(cp, 0, prec); if (p != NULL) { size = p - cp; if (size > prec) size = prec; } else size = prec; } else size = strlen(cp); sign = '\0'; break; case 'U': flags |= LONGINT; /*FALLTHROUGH*/ case 'u': _ulong = UARG(); base = DEC; goto nosign; case 'X': case 'x': _ulong = UARG(); base = HEX; /* leading 0x/X only if non-zero */ if (flags & ALT && _ulong != 0) flags |= HEXPREFIX; /* unsigned conversions */ nosign: sign = '\0'; /* * ``... diouXx conversions ... if a precision is * specified, the 0 flag will be ignored.'' * -- ANSI X3J11 */ number: if ((dprec = prec) >= 0) flags &= ~ZEROPAD; /* * ``The result of converting a zero value with an * explicit precision of zero is no characters.'' * -- ANSI X3J11 */ cp = buf + BUF; if (_ulong != 0 || prec != 0) { char *xdigs; /* digits for [xX] conversion */ /* * unsigned mod is hard, and unsigned mod * by a constant is easier than that by * a variable; hence this switch. */ switch (base) { case OCT: do { *--cp = to_char(_ulong & 7); _ulong >>= 3; } while (_ulong); /* handle octal leading 0 */ if (flags & ALT && *cp != '0') *--cp = '0'; break; case DEC: /* many numbers are 1 digit */ while (_ulong >= 10) { *--cp = to_char(_ulong % 10); _ulong /= 10; } *--cp = to_char(_ulong); break; case HEX: if (ch == 'X') xdigs = "0123456789ABCDEF"; else /* ch == 'x' || ch == 'p' */ xdigs = "0123456789abcdef"; do { *--cp = xdigs[_ulong & 15]; _ulong >>= 4; } while (_ulong); break; default: cp = "bug in vform: bad base"; goto skipsize; } } size = buf + BUF - cp; skipsize: break; default: /* "%?" prints ?, unless ? is NUL */ if (ch == '\0') goto done; /* pretend it was %c with argument ch */ cp = buf; *cp = ch; size = 1; sign = '\0'; break; } /* * All reasonable formats wind up here. At this point, * `cp' points to a string which (if not flags&LADJUST) * should be padded out to `width' places. If * flags&ZEROPAD, it should first be prefixed by any * sign or other prefix; otherwise, it should be blank * padded before the prefix is emitted. After any * left-hand padding and prefixing, emit zeroes * required by a decimal [diouxX] precision, then print * the string proper, then emit zeroes required by any * leftover floating precision; finally, if LADJUST, * pad with blanks. */ /* * compute actual size, so we know how much to pad. */ #if defined(FLOATING_POINT) && !defined (_IO_USE_DTOA) fieldsz = size + fpprec; #else fieldsz = size; #endif dpad = dprec - size; if (dpad < 0) dpad = 0; if (sign) fieldsz++; else if (flags & HEXPREFIX) fieldsz += 2; fieldsz += dpad; /* right-adjusting blank padding */ if ((flags & (LADJUST|ZEROPAD)) == 0) PAD_SP(width - fieldsz); /* prefix */ if (sign) { PRINT(&sign, 1); } else if (flags & HEXPREFIX) { ox[0] = '0'; ox[1] = ch; PRINT(ox, 2); } /* right-adjusting zero padding */ if ((flags & (LADJUST|ZEROPAD)) == ZEROPAD) PAD_0(width - fieldsz); /* leading zeroes from decimal precision */ PAD_0(dpad); /* the string or number proper */ PRINT(cp, size); #if defined(FLOATING_POINT) && !defined (_IO_USE_DTOA) /* trailing f.p. zeroes */ PAD_0(fpprec); #endif /* left-adjusting padding (always blank) */ if (flags & LADJUST) PAD_SP(width - fieldsz); /* finally, adjust ret */ ret += width > fieldsz ? width : fieldsz; } done: return ret; error: return EOF; /* NOTREACHED */ } #if defined(FLOATING_POINT) && !defined(_IO_USE_DTOA) static char *exponent(register char *p, register int exp, int fmtch) { register char *t; char expbuf[MAXEXP]; *p++ = fmtch; if (exp < 0) { exp = -exp; *p++ = '-'; } else *p++ = '+'; t = expbuf + MAXEXP; if (exp > 9) { do { *--t = to_char(exp % 10); } while ((exp /= 10) > 9); *--t = to_char(exp); for (; t < expbuf + MAXEXP; *p++ = *t++); } else { *p++ = '0'; *p++ = to_char(exp); } return (p); } static char * round(double fract, int *exp, register char *start, register char *end, char ch, int *signp) { double tmp; if (fract) (void)modf(fract * 10, &tmp); else tmp = to_digit(ch); if (tmp > 4) for (;; --end) { if (*end == '.') --end; if (++*end <= '9') break; *end = '0'; if (end == start) { if (exp) { /* e/E; increment exponent */ *end = '1'; ++*exp; } else { /* f; add extra digit */ *--end = '1'; --start; } break; } } /* ``"%.3f", (double)-0.0004'' gives you a negative 0. */ else if (*signp == '-') for (;; --end) { if (*end == '.') --end; if (*end != '0') break; if (end == start) *signp = 0; } return (start); } int __cvt_double(double number, register int prec, int flags, int *signp, int fmtch, char *startp, char *endp) { register char *p, *t; register double fract; int dotrim = 0, expcnt, gformat = 0; double integer, tmp; expcnt = 0; if (number < 0) { number = -number; *signp = '-'; } else *signp = 0; fract = modf(number, &integer); /* get an extra slot for rounding. */ t = ++startp; /* * get integer portion of number; put into the end of the buffer; the * .01 is added for modf(356.0 / 10, &integer) returning .59999999... */ for (p = endp - 1; integer; ++expcnt) { tmp = modf(integer / 10, &integer); *p-- = to_char((int)((tmp + .01) * 10)); } switch (fmtch) { case 'f': case 'F': /* reverse integer into beginning of buffer */ if (expcnt) for (; ++p < endp; *t++ = *p); else *t++ = '0'; /* * if precision required or alternate flag set, add in a * decimal point. */ if (prec || flags&ALT) *t++ = '.'; /* if requires more precision and some fraction left */ if (fract) { if (prec) do { fract = modf(fract * 10, &tmp); *t++ = to_char((int)tmp); } while (--prec && fract); if (fract) startp = round(fract, (int *)NULL, startp, t - 1, (char)0, signp); } for (; prec--; *t++ = '0'); break; case 'e': case 'E': eformat: if (expcnt) { *t++ = *++p; if (prec || flags&ALT) *t++ = '.'; /* if requires more precision and some integer left */ for (; prec && ++p < endp; --prec) *t++ = *p; /* * if done precision and more of the integer component, * round using it; adjust fract so we don't re-round * later. */ if (!prec && ++p < endp) { fract = 0; startp = round((double)0, &expcnt, startp, t - 1, *p, signp); } /* adjust expcnt for digit in front of decimal */ --expcnt; } /* until first fractional digit, decrement exponent */ else if (fract) { /* adjust expcnt for digit in front of decimal */ for (expcnt = -1;; --expcnt) { fract = modf(fract * 10, &tmp); if (tmp) break; } *t++ = to_char((int)tmp); if (prec || flags&ALT) *t++ = '.'; } else { *t++ = '0'; if (prec || flags&ALT) *t++ = '.'; } /* if requires more precision and some fraction left */ if (fract) { if (prec) do { fract = modf(fract * 10, &tmp); *t++ = to_char((int)tmp); } while (--prec && fract); if (fract) startp = round(fract, &expcnt, startp, t - 1, (char)0, signp); } /* if requires more precision */ for (; prec--; *t++ = '0'); /* unless alternate flag, trim any g/G format trailing 0's */ if (gformat && !(flags&ALT)) { while (t > startp && *--t == '0'); if (*t == '.') --t; ++t; } t = exponent(t, expcnt, fmtch); break; case 'g': case 'G': /* a precision of 0 is treated as a precision of 1. */ if (!prec) ++prec; /* * ``The style used depends on the value converted; style e * will be used only if the exponent resulting from the * conversion is less than -4 or greater than the precision.'' * -- ANSI X3J11 */ if (expcnt > prec || (!expcnt && fract && fract < .0001)) { /* * g/G format counts "significant digits, not digits of * precision; for the e/E format, this just causes an * off-by-one problem, i.e. g/G considers the digit * before the decimal point significant and e/E doesn't * count it as precision. */ --prec; fmtch -= 2; /* G->E, g->e */ gformat = 1; goto eformat; } /* * reverse integer into beginning of buffer, * note, decrement precision */ if (expcnt) for (; ++p < endp; *t++ = *p, --prec); else *t++ = '0'; /* * if precision required or alternate flag set, add in a * decimal point. If no digits yet, add in leading 0. */ if (prec || flags&ALT) { dotrim = 1; *t++ = '.'; } else dotrim = 0; /* if requires more precision and some fraction left */ if (fract) { if (prec) { /* If no integer part, don't count initial * zeros as significant digits. */ do { fract = modf(fract * 10, &tmp); *t++ = to_char((int)tmp); } while(!tmp && !expcnt); while (--prec && fract) { fract = modf(fract * 10, &tmp); *t++ = to_char((int)tmp); } } if (fract) startp = round(fract, (int *)NULL, startp, t - 1, (char)0, signp); } /* alternate format, adds 0's for precision, else trim 0's */ if (flags&ALT) for (; prec--; *t++ = '0'); else if (dotrim) { while (t > startp && *--t == '0'); if (*t != '.') ++t; } } return (t - startp); } #endif /* defined(FLOATING_POINT) && !defined(_IO_USE_DTOA) */ #if defined(__ELF__) || defined(__GNU_LIBRARY__) #include #ifdef weak_alias weak_alias (_IO_vfprintf, vfprintf); #endif #endif